3D Systems sPro, User Manual

Page: 156 / 280

SLS p r o c e s s 1 5 6 I R S & I P C
u s e r ’ s g u i d e u s i n g I R S m a i n m e n u
Us i n g I R S M a i n M e n u
Use the IRS main menu
in
Standby or Ready
mode— to view the
IRS software version
and to access
Setup ,
and Diagnostics . (You
must be in Standby to
access
Utilities .)
L
The IRS must be in Ready mode to transfer
powder. Powder cannot be transferred in
Standby mode because air flow to the IRS (and
IPC) is off in Standby .
You can also access Setup and Diagnostics in IRS
Ready mode, but you must be in Standby to
access
Utilities .
Some main menu options are mode-specific. For
example:
• The Utilities menu is only available when
the IRS is in Standby mode.
• The IPC Status menu option is only
available in the Ready mode.
To select main menu options
From Integrated Recycling Station Ready mode,
press to enter Standby mode.
The Standby mode display appears along with
the list of main menu options.
Press to choose an option, then press .
To view IRS software version
From the Main menu, choose About , then press
.
The BOS software version number and date
appears.
Press to return to the Main menu.
See Using the BOS
Setup Menu on
page 229 and Using the
BOS Diagnostics Menu
on page 232.
Integrated Recycling
Station Standing By
>Exit Standby
Setup
Standby mode display with Main menu
FW Ver: R13.03
MAC:0000000002
Build: 2005-10-18
About menu display