3D Systems sPro, User Manual

Page: 232 / 280

SLS p r o c e s s 2 3 2 B O S
u s e r ’ s g u i d e u s i n g t h e B O S d i a g n o s t i c s m e n u
Us i n g t h e B O S D i a g n o s t i c s M e n u
From the BOS Main
menu, use the BOS
Diagnostics menu to
access the Input Status
and Force Output
menus.
Use these menus to if you need to test BOS
operations or diagnose BOS problems. They
enable you to manually change the status of BOS
inputs and outputs; for example, from the
Diagnostics menu, you can manually test:
`
RCM part piston up/down motion
`
Air and powder transport valves
`
Stacklight lights
To select Diagnostic menu options
From the BOS Main menu, select Diagnostics .
The Diagnostics menu appears.
Press to choose an option, then press .
To access the Input Status menu
Use the Input Status menu to view and change
the status of BOS inputs.
From the Diagnostics menu, choose Input Status ,
then press . The Input Status menu appears.
Press to choose the input you want to view
or change, then press .
Valve outputs on the Force Output
menu should only be changed by
3D Systems certified service
personnel.
See Using the BOS Main
Menu on page 228 to
access the BOS Main
menu.
Diagnostics
>Input Status
Force Output
Diagnostics menu display
Input Status
>Move RCM Up
Move RCM Down
RCM Present
Input Status menu display