3D Systems sPro, User Manual

Page: 229 / 280

SLS p r o c e s s 2 2 9 B O S
u s e r ’ s g u i d e u s i n g t h e B O S s e t u p m e n u
Us i n g t h e B O S S e t u p M e n u
From the BOS Main
menu, use the BOS
Setup menu to access
the Process Params
and Eng Params
menus.
Use these menus to view and change BOS
process parameters or engineering parameters.
To select Setup menu options
From the BOS Main menu, select Setup .
The Setup menu appears.
Press to choose an option, then press .
To access the Process Params menu
Use the Process Params menu to view and
change the BOS RCM Com Mode and RCM Type
process parameters.
From the Setup menu, choose Process Params ,
then press .
The Process Params menu appears.
Press to choose the process parameter you
want to set, then press .
BOS engineering parameters on the
Eng Params menu should only be
changed by 3D Systems certified
service personnel.
See Using the BOS Main
Menu on page 228 to
access the BOS Main
menu
Setup
>Process Params
Eng Params
Setup menu display
Process Params
>RCM Com Mode
RCM Type
Process Params menu display