3D Systems, Inc.
20
p/n 76-D022 Rev. A
The SLS equipment uses ethernet ports on the ProX® 6100 Printer and SLS Single MQC System to send and receive powder
transfer and system status messages . There is one ethernet connector on the ProX® SLS 6100 system that is connected to the
SLS Single MQC and another that is connected to the facility’s LAN .
The ethernet connectors are RJ-45, using Category 5 unshielded twisted pair; 10BaseT, 100BaseT cables .
LAN 1
LAN 2
Customer
LAN
Electrical Box
ProX SLS 6100 3D Printer
SLS Single MQC System
Hub
11
NETWORK REQUIREMENTS
