The LC-3D Print Box-
CHECK AND CHANGE YOUR VOLTAGE IF NEEDED
The LC-3D Print Box comes with a pre-set voltage from the factory that may require changing to align
with your country specific voltage rating.
Note: No damage will occur to your unit if plugged into a
different voltage than how the unit is configured.
For proper heater and light output, it is required
to select the correct voltage. This is a one-time setting done at initial setup of your LC-3D Print Box.
After print box is turned on, the pre-set voltage appears at lower right corner of welcome screen. It will also
display on the main screen in the upper right corner.
Follow these instructions on how to change the pre-set voltage to your country specific voltage rating. Please
see the Voltage Rating Chart below to identify your country specific rating.
Note: If your country is not list-
ed, choose the correct voltage from the pulldown list on the print box (see voltage list below).
Country
Voltage
US
110V
Germany
230V
Italy
230V
Spain
230V
UK
230V
Ukraine
230V
France
230V
Country
Voltage
Australia
230V
New Zealand
230V
S. Korea
220V
Canada
120V
China
220V
Mexico
120V / 127V
Chile
220V
Country
Voltage
Czech Republic
230V
India
230V
Morocco
220V/127V
Portugal
230V
Russia
220V/230V
Taiwan
110V
Turkey
220V/230V
STOP: READ ME FIRST. DO THIS AT INSTALLATION.
Voltage selection on Printer Box
100V
110V/115V
120V/127V
220V
230V
240V
