manualshive.com logo in svg

3D Printing Systems UP! Desktop, User Manual

Share
Download
3D Printing Systems UP! Desktop User Manual Download Page 4

1. Introduction                                                                                           

UP!  3D  Printer  User  Manual                               

3 

1. Introduction   

1.1 How to use this manual 

This user manual is divided into four sections which cover the Introduction, Overview, 
Operation, and Troubleshooting. Please study this manual carefully before installation, 
and use the printer according to these instructions. Keep this manual handy and refer 
to it when necessary. 
 
Some great websites to help you on your way. 

•

 

http://www.pp3dp.com/forum

 

•

 

http://cloud.netfabb.com/

 STL file cleaner 

•

 

http://www.thingiverse.com/

 lots of STL models 

•

 

http://www.3dcontentcentral.com

 lots of 3D models 

•

 

http://www.cadspan.com/tools

 free plugin for Sketchup 

1.2 Precautions 

Please read this section carefully before using the printer. 

1.2.1 Safety 

 

The printer can only be used with the power adapters supplied with the printer, or 

the product may be damaged, with a risk of fire. 

 

To avoid burning, or model deformation, do not touch the model, nozzle, or the 

platform  by  hand,  or  any  other  part  of  the  body,  while  the  printer  is  working  or 

immediately after it has finished printing. 

 

Ensure  the  supplied  warning  stickers  are  attached  to  the  printer  in  the  relevant 

places. 

The following classifications are used in this manual. 

 

 

CAUTION:  Indicates  a  potentially  hazardous  situation  which,  if  not 

avoided, may result in minor or moderate injury. 

 

WARNING:  Indicates  a  potentially  hazardous  situation  which,  if  not 

avoided, may result in serious injury. 

Summary of Contents for UP! Desktop







































Reviews:

No comments

Brands by name

Popular brands

Load more brands