page
3
... print your plane | www.
3DLabPrint
.com
General specifications (HP setup):
Wingspan:
1442 mm / 56.8 inch
Lenght:
1094 mm / 43.1 inch
Height:
433 mm / 17.0 inch
Wing area:
54,5 dm2 / 7.0 square foot
Wing loading:
59 g/dm2 / 19.0 oz/square foot
Center of gravity:
120 mm from leading edge
of upper wing
Airfoil:
special LHK mod. by 3DLabPrint
Print weight (PLA):
2358 g / 83.2 oz
Empty weight (w/o battery):
2800 g / 98.7 oz
Takeoff weight (6s 2700 lipo):
3230 g / 113.9 oz
Max takeoff weight:
3500 g / 123.46 oz
Never exceed speed, VNE:
100 km/h / 49 mph
Design maneuvering speed, VA:
60 km/h / 31 mph
Stall speed, VS:
25 km/h / 9.4 mph
Recommended setup
Motor:
Turnigy SK3 5055 430KV (for 6S setup)
or any 5055 430 - 380grams motor (for 6s setup)
ESC:
80A 6s with UBEC or any 6s 60-100A + connector suitable for battery.
Battery:
2700 - 3300 mAh 6S or any 6s (500-600g)
Propeller:
wooden 15“ x 6“
printed PET motor mount
Performance measurement
Max speed VH (level flight):
65 km/h – 35 kn – 40 mph with wooden 15 x 6
Rate of climb:
5 m/s (960 ft/min) with wooden 15 x 6
Flight time (6s 2700mAh):
12:30 with wooden 15 x 6
