3D Joy JoysMaker R2, Assembly Manual

Page: 4 / 62

JoysMaker 3DJoy version R2 assembly guide
4
1.0 Frame assembled
1.0.1 Preparation
Time Needed
：
About 50 to 90 minutes.
Tools needed:
1. Allen wrench (1.5mm
和
2.0mm)
2. 2mm Hexagon screwdriver
3. The pliers
All components required for the subcontract encapsulation assembly printers, below in the
assembly process, indicating the name of this step needed components.
1.0.2 Some Conception
Metric: the product is most used in the design of the metric system (mm and m). Use
another dimension is inch (inches and inches). Most of the parts are using the M3 (3 mm
diameter).
T-Slots and tabs
：
Note: some may show on the drawing is not the T slot, but is the square nut, direct use of
hexagonal nut.