LAN Settings
53
1
Enter the Router’s
IP Address
and
Subnet Mask
in the appropriate fields.
The default IP address is 192.168.1.1.
2
If you want to use the Router as a DHCP Server, check
Enable
in the
DHCP
Server
field.
3
Enter the IP address range in the
IP Pool Start Address
and
IP Pool End
Address
fields.
4
Specify the DHCP Lease time by selecting the required value from the
Lease Time
drop-down menu. The lease time is the length of time the
DHCP server will reserve the IP address for each computer.
5
Specify the Local Domain Name for your network (this step is optional).
6
Enter the IP address of the NBX Call Processor in the
3Com NBX Call
Processor
field (this step is optional).
7
Check all of your settings, and then click
Apply
.
DHCP Clients List
The DHCP Clients List provides details on the devices that have received IP
addresses from the Router. The list is only created when the Router is set
up as a DHCP server. A maximum of 253 clients can be connected to the
Router.
Figure 38
DHCP Clients List Screen
For each device that is connected to the LAN, the following information is
displayed:
■
IP address
— The Internet Protocol (IP) address issued to the client
machine.
Downloaded from
www.Manualslib.com
manuals search engine
Summary of Contents for WL-602
