61
128-bit—Each key contains 26 hexadecimal digits or 13 alphanumeric
characters.
152-bit—Each key contains 32 hexadecimal digits or 16 alphanumeric
characters.
3Com Passphrase—This encryption string is for use only with other 3Com
Wireless LAN devices. It is a case-sensitive string between 6 and 30 characters
long. To enter the string, click
3Com Passphrase.
Then type any combination
of letters and numbers in the Key 1 field and click
Apply.
5
Uncheck box under WPA Configuration
6
Choose the WEP option under Multicast Cipher Mode.
H
OW
TO
SETUP
THE
ACCESS
POINT
FOR
RADIUS
AUTHENTICATION
1
Using the Wireless Infrastructure Device Manger access the configuration
screen for the access point.
2
Enter your User Name and Password and click LOGIN (Default: admin with no
password)
3
Select
Advanced
Setup.
4
Click on
RADIUS
from the left frame page Menu.
5
Enter all the settings of your Primary RADIUS Authentication Server (make
sure the IP Address and Key match those on the RADIUS Authentication
software).
6
Click on
Apply
7
Choose
Authentication
from the left frame page Menu
8
Make sure the following settings are set on the Authentication page:
a MAC
Authentication
is Disabled. (if Local or RADIUS MAC Authentication
is chosen MAC address filtering or authentication, respectively, will be
done before the 802.1x authentication. Therefore, these setups must be
validated individually and verified functional before 802.1x can be done).
b 802.1x Wireless Setup:
is set to Supported (if non-RADIUS clients need
access too) or Required (if only RADIUS clients are to be allowed).
c
Click on
Apply
.
9
Click
Security
on the 802.11a/b/g radio from the left frame page Menu
10
Make sure the following settings are set from the Security page:
a
Authentication is set to
Open System
