46
Users can be created and placed into a group. There are two parameters to
configure: authentication and privacy. The selected authentication and privacy
policy must match the group security level. For example, if an SNMP user is
configured for MD5 authentication and its group does not allow authentication,
an error message appears.
Duplicate user names or group names is not allowed.
User
—Specifies the SNMP v3 security name. The security name represents the
user in a format that is Security Model-independent.
Group
—Specifies the name of the group to which the SNMP v3 user is
associated. Assigning users to different groups allows the users to have
different access rights.
Auth Type
—The SNMP v3 authentication protocol.
Passphrase
—The SNMP v3 authentication password.
Priv Type
—The SNMP v3 privacy protocol.
Passphrase
—The SNMP v3 privacy password.
Action
—Click
Add
to add the SNMP v3 user; click
Delete
to remove the
SNMP v3 user.
G
ROUPS
GroupName
—Enter a name for the group.
SecurityLevel
—Select a security level:
noAuthNoPriv—The group does not use authentication protocol and
privacy protocol.
authNoPriv—The group is using authentication protocol, but is not using
privacy protocol.
authPriv—The group is using authentication protocol and privacy protocol.
Write View
—Assigns write-access to users of this group.
Action
—Click
Add
to add the group; click
Delete
to remove the group.
Group List
—A list of the available groups that the SNMP v3 users can be
assigned to.
