3Com SuperStack II 3300, User Manual

Page: 7 / 172

A
BOUT
T
HIS
G
UIDE
This guide describes the SuperStack
®
II Switch Layer 3 Module for the
SuperStack II Switch 1100 and 3300 family. Before reading this guide,
make sure that you are familiar with routing concepts and Virtual LANs
(VLANs). Make sure you are also familiar with the command line and Web
interfaces for the SuperStack II Switch 1100 and 3300 products.
If release notes are shipped with your product and the information there
differs from the information in this guide, follow the instructions in the
release notes.
This user guide and its release notes are available in Adobe Acrobat
Reader Portable Document Format (PDF) on the 3Com World Wide Web
site:
http://www.3com.com/
How to Use This
Guide
Table 1 shows where to look for specific information in this guide.
Table 1 Where to find specific information
If you are looking for… Turn to…
An overview of the module, and an outline of its main features Chapter 1
Information on where to place the module in your network Chapter 2
Installation information for the module Chapter 3
Information on managing the module Chapter 4
Information about using the Web interface Chapter 5
Information on configuring system and SNMP parameters Chapter 6
Information on configuring VLANs Chapter 7
Information on configuring IP parameters on the module, including
RIP and OSPF Chapter 8
Problem solving information Chapter 9
(continued)