background image

Cabling the Connectors

1-7

Cabling the Serial

Connectors

The serial connectors provide the following options:

The UNIVERSAL connector can be converted to a V.35, V.36, X.21, 
RS-449, or RS-232 connector. 

All serial connectors can function in either DTE or DCE-like mode, 
which allows you to connect a serial connector to either a CSU/DSU 
device or modem (DTE mode), or to an IBM cluster controller 
(DCE-like mode). A connection to an IBM cluster controller must be 
made using a permanent leased line only. You can operate the serial 
connectors in any combination of DTE and DCE-like modes.

The cables you use determine the serial connector function. Table 1-2 
lists the types of devices available for serial connections, cable options 
for connection to each device, and if the cable is sold by 3Com. Cables 
used for IBM cluster controller connectivity (DCE-like mode) are referred 
to as 

direct connect cables

.

* If you cable the UNIVERSAL connector, you need to perform some software configuration. For more information, refer to the

software guide.

Table 1-2   

Serial Connector Cabling Information 

Connection to

Connector

*

Connector 
Mode

Cable Name

Sold by 3Com?

V.35 CSU/DSU device or 
modem

V.35

DTE

V.35 to V.35 DCE cable

No. Easily obtained from 
cable manufacturer.

V.35 CSU/DSU device or 
modem

UNIVERSAL

DTE

V.35 adapter cable

Yes (3C8035).

V.35 IBM cluster controller

V.35

DCE-like

V.35 to V.35 direct connect 
cable

No. See Chapter 2 for 
pin assignments.

V.35 IBM cluster controller

UNIVERSAL

DCE-like

UNIVERSAL to V.35 direct 
connect cable

Yes (3C8135).

X.21 CSU/DSU device or 
modem

UNIVERSAL

DTE

X.21 adapter cable

Yes (3C8021).

RS-449 or V.36 CSU/DSU 
device or modem

UNIVERSAL

DTE

UNIVERSAL to RS-449/V.36 
DCE cable

No. See Chapter 2 for 
pin assignments.

RS-449 or V.36 IBM cluster 
controller

UNIVERSAL

DCE-like

UNIVERSAL to RS-449/V.36 
direct connect cable

No. See Chapter 2 for 
pin assignments.

RS-232 CSU/DSU device or 
modem

UNIVERSAL

DTE

UNIVERSAL to RS-232 DCE 
cable

Yes (3C8023).

RS-232 CSU/DSU device or 
modem

RS-232

DTE

RS-232 to RS-232 DCE cable

No. Easily obtained from 
cable manufacturer.

RS-232 IBM cluster controller UNIVERSAL

DCE-like

UNIVERSAL to RS-232 direct 
connect cable

Yes (3C8123).

RS-232 IBM cluster controller RS-232

DCE-like

RS-232 to RS-232 direct 
connect cable

Yes (3C8132).

SS2TRHWBook  Page 7  Monday, May 5, 1997  3:11 PM

Summary of Contents for SuperStack II 32x













































































Reviews: