background image

4

S

UPER

S

TACK

®

 3 F

IREWALL

 F

IRMWARE

 V

ERSION

 6.0.2 R

ELEASE

 N

OTES

NETBIOS Pass Through Facility

The NETBIOS pass through facility does not function 
correctly, so it is not possible to find computers on the 
DMZ port from the LAN using 

Network 

Neighborhood

 or 

Find Computer

.

Policy Creation

If you create a policy that allows traffic into specific IP 
addresses on the LAN, the Firewall should show a "!" 
in the Network Policy Rules screen to indicate a 
potential security hole. The Firewall does not display 
the "!".

Using Microsoft Exchange Server

For users of Microsoft Exchange Server, 3Com 
recommends that Exchange Server is deployed on the 
LAN and not the DMZ.

Bugs Fixed in this Release

This section lists the major bug fixes between 
firmware version 5.0.7 and firmware version 6.02.

A bug that caused VPN problems when 100 SA's 
were entered has been fixed. 

An interoperability issue with the Lucent Brick has 
been addressed.

In rare instances, flash corruption occurred and 
caused the unit to resort to factory default 
settings. This bug has been fixed.

A bug which caused cache full errors was fixed.

TFTP traffic now passes correctly from the WAN to 
the LAN.

A bug that caused VPN tunnels using IKE to remain 
disabled until the Firewall was restarted has been 
fixed.

A bug that caused the re-negotiate button to 
intermittently stop functioning until the Firewall 
was restarted has been fixed.

A bug which caused a delay in loading the 
management login screen when using Microsoft 
Internet Explorer was resolved. To avoid this delay, 
check the new "Manage using IE" box on the 
Access/Management page.

H.323/NetMeeting support has been enhanced to 
allow full audio and video between a SuperStack 3 
and non-SuperStack 3 endpoint.

Multicast packets are no longer cached.

A bug which caused automatically created rules to 
be lost upon a restore to factory defaults has been 
fixed.

A bug which caused IP Spoof alerts to be 
generated when using NetBIOS between the LAN 
and the DMZ has been fixed.

A bug which caused PPPoE sessions to be 
disconnected has been fixed.

A bug which caused the DHCP server to assign 
invalid leases to LAN users has been fixed.

Problems which caused fragmented PPTP and 
IPSec packets to break the VPN tunnel have been 
resolved.

A bug which prevented Stealth mode from 
working in standard mode has been fixed.

DNA1611-0AAA01.fm  Page 4  Tuesday, September 4, 2001  10:10 AM

Summary of Contents for SUPERSTACK 3CR16110-95







Reviews: