2
S
UPER
S
TACK
®
3 F
IREWALL
F
IRMWARE
V
ERSION
6.0.2 R
ELEASE
N
OTES
After Upgrading to Version 6.0.2
After upgrading to version 6.0.2 of the firmware,
3Com recommends that you configure the unit as
follows:
Note:
This procedure must be performed from a
machine on the Firewall’s LAN.
1
Reset admin password to "password". Click the
general label and then the
Set Password
tab to set the
password. Resetting the password allows you to use
the new install wizard for initial configuration.
2
Restore factory default settings. Click the
Tools
label,
the
Configuration
tab and then the
Restore
button.
3
Restart the unit.
4
The unit will display the Firewall Installation Wizard.
Perform initial configuration.
5
After the unit has restarted, enter any additional
configuration using the Web interface.
Failure to follow this procedure may result in an
invalid configuration.
New Features in This Release
Version 6.0.2 provides support for the following:
■
SuperStack 3 Firewall (3CR16110-95).
■
SuperStack 3 Firewall (3CR16110-97)
■
SuperStack 3 Firewall Web Site Filter (3C16111)
This section lists new features and enhancements
between firmware version 5.0.7 and firmware version
6.0.2.
■
A new Installation Wizard can be used to set up
the Firewall quickly.
■
A Group VPN feature for simplified VPN client
deployment has been added.
■
A new VPN Routing feature allows easy setup of
secure traffic in a "hub and spoke" configuration
between remote offices.
■
A new High Availability feature eliminates network
downtime by enabling the use of a backup Firewall
for failover.
■
It is now possible to perform one touch VPN client
configuration file creation using the GroupVPN
export function.
■
The Firewall is shipped with 56-bit encryption for
wider distribution; this can be web-upgraded to
168-bit.
■
Changing VPN security associations no longer
requires a restart.
■
Enhanced logging of VPN IKE negotiations is now
available.
■
TFTP LAN clients behind the Firewall are now
supported.
■
Netscape 6.0 can now be used to access the Web
interface.
■
To provide compatibility with more ISPs, the PPPoE
user name and password can contain up to 63
characters.
■
IMAP, NetBIOS, and PC Anywhere have been
added as known services.
DNA1611-0AAA01.fm Page 2 Tuesday, September 4, 2001 10:10 AM
