manualshive.com logo in svg

3Com PathBuilder S200 Series, Owner'S Manual, Page: 150 / 162

Share
Download
3Com PathBuilder S200 Series Owner'S Manual Download Page 150

146 

Bridging

Bridge Statistics

Remote Spoofer Session Summary

TX Window:

Transmit window size obtained from the configuration for 
LLC WAN parameters.

Protocol State:

Number of the state for current session with remote spoofer.

Info:

Number of information frames received or transmitted by the 
local spoofer to or from the remote spoofer.

RR:

Number of RR frames received or transmitted by the local 
spoofer to or from the remote spoofer.

RNR:

Number of RNR frames received or transmitted by the local 
spoofer to or from the remote spoofer.

REJ:

Number of REJ frames received or transmitted by the local 
spoofer from or to the remote spoofer.

SABME

Number of SABME frames received or transmitted by the 
local spoofer from or to the remote spoofer.

UA:

Number of Unnumbered Acknowledgment (UA) frames 
received or transmitted by the local spoofer to or from the 
remote spoofer.

UI:

Number of Unnumbered Information (UI) frames received 
by the local spoofer from the remote spoofer.

TEST:

Number of Test frames received by the local spoofer from 
the remote spoofer.

XID:

Number of XID frames received by the local spoofer from 
the remote spoofer.

DISC:

Disconnect.

DM:

Disconnect node.

Frames received 
out of sequence:

Number of frames received out of sequence from the remote 
spoofer.

Bad frames 
received:

Number of bad frames received from the remote spoofer. 

Frames dropped:

Frames from the remote spoofer, dropped due to congestion 
(LAN queue full). 

Heading

Description (continued)

Summary of Contents for PathBuilder S200 Series



































































































































































Reviews:

No comments