3Com OfficeConnect Remote 510, User Manual

Page: 43 / 96

Quick Configuration 1-29
■
3Com – 3Com NETBuilder router.
■
Cisco – Cisco router.
■
Ascend – Ascend router.
■
Spider – Spider/Shiva router.
I f you are connecting to a Spider/Shiva router, you
need also to edit the ISDN port’s configuration and set
the PAP field in the LCP Configuration screen to
Incoming. See the Software Reference guide for details.
PAP Password to login to Remote Site By default
this is set to
UNUSED
. If you need to use a PAP
password, enter the password provided by your
Internet service provider or the system administrator
responsible for the remote router. This password is
submitted to the remote unit for it to verify.
The password is case-sensitive.
PAP Password for others to login to you By default
this is set to
UNUSED
. If you need to use a PAP
password, enter the password provided by your
Internet service provider or the system administrator
responsible for the remote router. Your unit verifies
that the remote unit is valid by comparing its
submitted PAP password with the entry in this field.
The password is case-sensitive.
CHAP Password to login to Remote Site By default
this is set to
UNUSED
. If you need to use a CHAP
password, enter the password provided by your
Internet service provider or the system administrator
responsible for the remote router. This password is
submitted to the remote unit for it to verify. The
password is case-sensitive. To ensure security, it is
recommended that the local password is different
from the remote password.
CHAP Password for others to login to you By
default this is set to
UNUSED
. If you need to use a
CHAP password, enter the password provided by your
Internet service provider or the system administrator
responsible for the remote router. Your unit verifies
that the remote unit is valid by comparing its
submitted CHAP password with the entry in this
field. The password is case-sensitive.
Press [CTRL]+[E] to save this information.
An entry is made in the autocall table so that if any
data destined for the Internet or Remote PPP routed
network, a call is made automatically and a
connection made to the remote router.
Enter
SAVE
at the command prompt to permanently
store this configuration in the unit’s memory.
Rc.bk : RC01.FRM Page 29 Thursday, July 10, 1997 9:53 AM