3Com OfficeConnect Remote 510, User Manual

Page: 32 / 96

1-18 C
H A P T E R
1: G
E T T I N G
S
T A R T E D
The VOICE port is terminated with an RJ-11 socket. If
your telephone equipment uses a different connector,
you will need to obtain a suitable convertor to connect
to the VOICE port. A British Telecom to RJ11 convertor is
supplied with UK models fitted with a Voice port.
A dial tone is not provided to the handset if the ISDN
line is not operational or has been disconnected.
Connecting a Management Terminal
Connect the Serial Manager cable to the Serial
Manager port (marked Serial). Connect the other
end to the serial COM port on your PC workstation.
When you have connected a management terminal,
you can configure the Office Connect Remote to
communicate with the remote site(s). See “Quick
Configuration” overleaf.
Location of OfficeConnect Fax and Print
Servers
If you are connecting the OfficeConnect Fax Server or
Print Server to the OfficeConnect Remote, you must
configure these units to operate with local servers
only. If you do not do this, unnecessary ISDN calls are
made, caused by the fax or print server polling the fax
or print queue on remote servers at regular intervals
(between once every 30 seconds to once a minute).
Rc.bk : RC01.FRM Page 18 Thursday, July 10, 1997 9:53 AM