manualshive.com logo in svg

3Com OfficeConnect 3CRWE554G72, User Manual, Page: 7 / 126

Share
Download
3Com OfficeConnect 3CRWE554G72 User Manual Download Page 7

A

BOUT

 T

HIS

 G

UIDE

This guide describes how to install and configure the OfficeConnect 
Wireless 11g Cable/DSL Gateway (3CRWE554G72).

This guide is intended for use by those responsible for installing and 
setting up network equipment; consequently, it assumes a basic working 
knowledge of LANs (Local Area Networks) and Internet gateway systems.

If a release note is shipped with the OfficeConnect Wireless 11g 
Cable/DSL Gateway and contains information that differs from the 
information in this guide, follow the information in the release note.

Most user guides and release notes are available in Adobe Acrobat 
Reader Portable Document Format (PDF) on the 3Com World Wide Web 
site:

http://www.3com.com

Naming Convention

Throughout this guide, the OfficeConnect Wireless 11g Cable/DSL 
Gateway is referred to as the “Gateway”.

Category 3 and Category 5 Twisted Pair Cables are referred to as Twisted 
Pair Cables throughout this guide.

Summary of Contents for OfficeConnect 3CRWE554G72































































































































Reviews:

No comments