![background image](http://html1.mh-extra.com/html/3com/officeconnect-3crwe554g72/officeconnect-3crwe554g72_user-manual_440843016.webp)
16
C
HAPTER
1: I
NTRODUCING
THE
G
ATEWAY
5 Cable/DSL Status LED
Green (100Mbps link) / yellow (10Mbps link)
If the LED is on, the link between the Gateway and the cable or DSL
modem is OK. If the LED is flashing, the link is OK and data is being
transmitted or received. If the LED is off, nothing is connected, the
modem is switched off or there is a problem (refer to
Chapter 6
“Troubleshooting”
).
Rear Panel
The rear panel (
Figure 4
) of the Gateway contains four LAN ports, one
Ethernet Cable/DSL port, a power adapter OK LED, and a power adapter
socket.
Figure 4
Gateway - Rear Panel
6 Wireless Antennae
The antennae on the product should be placed in a ‘V’ position when
initially installed.
CAUTION:
Do not force the antennae beyond their mechanical stops.
Rotating the antennae further may cause damage.
7 Power Adapter Socket
Only use the power adapter supplied with this Gateway. Do not use any
other adapter.
8 Power Adapter OK LED
Green
Indicates that the power adapter is supplying power to the Gateway. If
the LED is off, there may be a problem with the power adapter or adapter
cable.
9 Ethernet Cable/DSL port
Use the supplied patch cable to connect the Gateway to the Ethernet
port on your cable or DSL modem. The port will automatically adjust to
the correct speed and duplex, and will set itself to MDI or MDIX
7
9
10
8
4
Ethernet
Cable/
DSL
OK
6
6
LAN
Summary of Contents for OfficeConnect 3CRWE554G72
