Save Your
Configuration
RFC1483
Static
Configuration
PPPoE or
PPPoA
Configuration
Voice
Configuration
In an RFC 1483 or an RFC 1483-MER configuration with static IP
addressing, the
DHCP Client over WAN
setting is disabled. You
will also see fields for local and remote WAN IP addresses, and
for the WAN IP Mask.
Assign a meaningful name to your configuration in the
PVC
Name
field, and record your settings here:
PVC Name: ________________ VPI: _______ VCI: _______
Local WAN IP Address:
_____ . _____ . _____ . _____
Remote WAN IP Address:
_____ . _____ . _____ . _____
WAN IP Mask:
_____ . _____ . _____ . _____
Click the Apply button to apply your changes.
7
The PPPoE and PPPoA configurations require a PPP login
account with your Service Provider, in addition to VPI/VCI
numbers and IP addresses. Select the appropriate protocol from
the WAN Protocol drop-down menu.
Assign a meaningful name to your configuration in the
PVC
Name
field, and record your settings here:
User Name: _______________ Password: _______________
PVC Name: ________________ VPI: _______ VCI: _______
If the Service Provider uses dynamic addressing, set the
Address
Selection
field to Negotiate. For static addressing, set the field to
Specified and complete the fields below:
Local WAN IP Address:
_____ . _____ . _____ . _____
Remote WAN IP Address:
_____ . _____ . _____ . _____
WAN IP Mask:
_____ . _____ . _____ . _____
Click the Apply button to apply your changes.
The Voice Configuration page only appears when the
OfficeConnect Gateway Voice Expansion unit is connected to
your OfficeConnect Gateway Data unit, and is used to configure
the phone ports on the Voice Expansion unit.
Select the appropriate Gateway from the drop-down menu, fill in
the VPI and VCI numbers, and select the Companding value as
specified by your Service Provider. Record your settings here:
Gateway: _____________ VPI: _______ VCI: _______
Click the Apply button to apply your changes.
Important
: Remember to save your completed configuration using
the SaveAll button.
