1
Installing the PC Card
2
Connecting the PC Card
1 Remove all PC Cards from your notebook.
2 With the power off, insert the PC Card into the PC Card slot and slide it all the way in.
3 Connect one end of the network cable to the RJ-45 port on the card.
This port is indicated on the card with a network icon.
4 Connect the other end to a LAN port (on an Ethernet hub, for example).
5 You are now ready to install the network driver. In this guide, go to the chapter for your notebook
operating system.
CAUTION:
Forcing the card into the slot may bend the pins. If you do not know how to insert cards in
your computer, refer to the documentation supplied with your computer.
NOTE:
All cables used with the OfficeConnect 10/100 LAN CardBus PC Card lock in place when connected
to the card. To release the cables, squeeze the release clip located on the top of the connector.
10/100 LAN C
ard
Bus