3Com OFFICE CONNECT CABLE/DSL SECURE GATEWAY 3CR856-95, User Manual

Page: 27 / 102

27
Static IP Mode
To setup the Gateway for use with a static IP address connection,
use the following procedure:
Figure 17 Static IP Mode Screen
1
Enter your IP Address in the IP Address text box.
2 Enter your subnet mask in the Subnet Mask text box.
3
Enter your ISP gateway address in the Internet (ISP) Gateway
Address text box.
4 Enter your primary DNS address in the Primary DNS Address text
box.
5
If your ISP provides a secondary DNS address, enter it in the
Secondary DNS Address text box, otherwise leave the box blank.
6 Click Next to continue.
Dynamic IP Address Mode
To setup the Gateway for use with a dynamic IP address
connection:
Figure 18 Hostname Screen
1 If your ISP requires the addresses of a Primary and Secondary
DNS Server then enter them in the fields labelled
Primary DNS
Address and Secondary DNS Address .
If your ISP does not require one of the fields to be filled in then
leave it blank. This indicates to the Gateway that there is no
server.
2 If your ISP requires you to supply a host name enter it in the Host
Name box, otherwise leave the box blank.
3
Click Next to continue to the Clone MAC Address screen, shown
in Figure 19 below.
dua08 569-5aaa02.bo o k Pag e 27 Thursday , No vem ber 7 , 2002 3:09 PM