Configuring the TCP/IP Protocol
13
NOTE: The numbers on your screen SHOULD be different
than those shown in the preceding example.
Configuring the TCP/IP Protocol on a Macintosh PC
You need to make sure the TCP/IP communications
protocol and an Ethernet device is installed on your system
before you install your cable modem. Many Macintosh
computers have Ethernet devices installed at the factory.
1
Click the
Apple
icon in the upper left corner of the Finder.
Scroll down to
Control Panels
, and click
TCP/IP
.
2
Click
Edit
on the Finder (gray bar) at the top of the screen.
Scroll down to the bottom of the menu and click
User
Mode
.
3
Click the
Advanced
button then click
OK
.