![background image](http://html1.mh-extra.com/html/3com/h3c-secpath-f5000-a5-advanced-vpn-firewall-12-port-gigabit-ethernet/h3c-secpath-f5000-a5-advanced-vpn-firewall-12-port-gigabit-ethernet_installation-manual_3098102124.webp)
7-14
Step1
Face the front panel of the firewall.
Step2
Locate the power module to be removed, and loosen the captive screws on the power module by
turning them counterclockwise with a Philips screwdriver.
Figure 7-21
Loosen the captive screws
Step3
Gently pull the power module out along the slide rails.
Figure 7-22
Pull out the power module
z
To protect the removed power module, place it in an antistatic bag.
z
If you do not install a new power module in the slot, install a blank panel to prevent dust from
entering the chassis. For how to install a blank panel, refer to “Installing and Removing a Blank
Panel” on page 7-9.