3
Installing DynamicAccess Software
32
Installing Dynamic
Access
Software in Windows NT 4.0 or
Windows 2000
For Windows NT 4.0, Dynamic
Access
software requires Service Pack 6.0a
or higher.
Follow these steps for installing Dynamic
Access
software for a server NIC in a
WIndows 2000 or Windows NT 4.0 computer:
1 Make sure that the NIC and the network driver are installed.
2 Start your Windows system and log in.
You must have Network Administrator privileges to install the
Dynamic
Access
software.
3 Insert the 3Com Gigabit EtherLink Server CD into the system
CD-ROM drive.
4 Enter the proper path for your operating system, where e:\ is the
designation of the CD-ROM drive on your system:
■
Windows 2000:
e:\DA\Win2K\dasetup.exe
■
Windows NT 4.0:
e:\DA\NT20\daserver.exe
5 Click
Install DynamicAccess Technology
.
6 When prompted, click (
Yes
) Install Dynamic
Access
Technology.
When Dynamic
Access
server features are installed for Windows 2000,
LAN connections bind to the Dynamic
Access
protocol and real protocols
bind to the Dynamic
Access
Miniport. Do not modify these binding.
When Dynamic
Access
features are installed for Windows NT 4.0 Server,
adapters bind to the Dynamic
Access
protocol and real protocols bind to
the Dynamic
Access
Miniport. Do not modify these bindings.
