Installing the Network Driver
9
3 Click
OK
.
The Insert Disk dialog box appears.
4 Open the pull-down menu and select:
c:\windows\options\cabs
5 Click
OK
.
Files are copied.
If you are prompted for the
EtherCD
, click
OK
, make sure
that the drive letter of the CD-ROM drive (for example, d:\)
appears in the dialog box, and then click
OK
.
You are prompted for the Windows 98 CD.
6 Remove the
EtherCD
, insert the Windows 98 CD,
and then click
OK
.
Files are copied. You are prompted to restart the PC.
7 Remove the Windows 98 CD, and then click
Yes
to
restart the PC.
You must restart the PC to complete the installation.
The installation is complete. Go to the next section,
“
Verifying Successful Installation
,” to confirm that the
NIC is properly installed.
After Windows restarts, double-click the Network icon
in the Windows Control Panel and make sure that
the correct configuration settings are selected for your
network environment. Contact your system administrator
for assistance.
Windows NT 4.0
To install the network driver:
1 Turn on the power to the PC.
2 Double-click the My Computer icon, then the
Control Panel icon, and then the Network
icon.
The Network window appears.
3 Click the Adapters
tab
.
If networking has not been installed on your PC before,
Windows NT asks you if you want to install networking.
Click
Yes
. See the WINNT.TXT file located on the
EtherCD
or your Windows NT documentation for instructions.
rn_body.SML Page 9 Wednesday, June 9, 1999 7:56 AM
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
