3Com CoreBuilder 9000, User Manual

Page: 149 / 468

Network Prefix 149
Network Prefix
You can display and configure the network prefix.
Display Network Prefix
Update Network Prefix
Reset Network Prefix Configuration
For more information about the use of Network Prefix, see “Hierarchic
ATM Addressing” on page 336.
Display Network
Prefix
Display the Network Prefix of the CoreBuilder 9000 ATM Enterprise
Switch.
Command Actions
Command Result
Example
Enter:
1 1 6 1
The following information is displayed
:
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(6) SNP: Switch Network Prefix Setup
(1) GET: Get Network Prefix
Direct access sequence:
1 1 6 1
System action taken: The network prefix of the CoreBuilder 9000 ATM
Enterprise Switch is displayed.
System message display:
Information is displayed as shown in the example.
Current Switch Network Prefix:
47.0.0.0.0.0.3c.0.0.a0.0.0.0
The number of significant digits in the Switch Network