3Com CoreBuilder 9000, User Manual

Page: 150 / 468

150 C
HAPTER
6: M
ANAGING
N
ETWORK
I
NTERFACES
Update Network
Prefix
Update the Network Prefix in the CoreBuilder 9000 ATM Enterprise
Switch.
The prefix update takes place after the next reboot.
Command Actions
Command Result
Example
Enter:
1 1 6 2
The following prompt is displayed:
Enter parameter(s): 'Net Prefix(13 bytes - First byte: 47, 39
or 45)'
Enter a network prefix.
The switch network prefix was set for the next reboot.
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(6) SNP: Switch Network Prefix Setup
(2) SET: Set Network Prefix
Enter a parameter at the prompt
Parameter Format or Range
Network Prefix 13 bytes - First byte: 47, 39 or 45
Direct access sequence:
1 1 6 2
[parameters]
System action taken:
The network prefix is updated for the next reboot.
System message display:
The switch network prefix was set for
the next reboot.