Regulatory
Information
The 3Com WLAN Managed AP3850, Model AP3850 (3CRWX385075A)
must be installed and used in strict accordance with the manufacturer’s
instructions as described in the user documentation that comes with the
product.
This product contains encryption. It is unlawful to export out of the U.S.
without obtaining a U.S. Export License.
This product does not contain any user serviceable components. Any
unauthorized product changes or modifications will invalidate 3Com’s
warranty and all applicable regulatory certifications and approvals.
This product must be installed by a professional technician/installer.
Only antennas specified for your region by 3Com can be used with this
product. The use of external amplifiers or non-3Com antennas may
invalidate regulatory certifications and approvals.
This product can be used with the following antennas and accessories:
Suitable RF power levels for internal and external antennas are handled
automatically by your 3Com Wireless Switch or Controller. Ensure that
the switch or controller configuration is modified to use the antenna that
is connected to the Access Point.
Refer to the Mobility System Configuration Guide or to the 3Com
Wireless LAN Switch Reference Manual to modify the access point
settings.
Caution: Exposure to
Radio Frequency
Radiation
This device generates and radiates radio-frequency energy. In order to
comply with FCC radio-frequency exposure guidelines for an uncontrolled
environment, this equipment must be installed and operated while
maintaining a minimum body to antenna distance of 20 cm
(approximately 8 in.).
The installer of this radio equipment must ensure that the antenna is
located or pointed such that it does not emit RF field in excess of Health
Canada limits for the general population; consult Safety Code 6,
obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb.
This equipment complies with IC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. This
equipment should be installed and operated with minimum distance
20cm between the radiator and your body.
This product must maintain a minimum body to antenna distance of 20
cm. Under these conditions this product will meet the Basic Restriction
limits of 1999/519/EC [Council Recommendation of 12 July 1999 on the
limitation of exposure of the general public to electromagnetic fields (0
Hz to 300 GHz)].
Item
Description
Exclusions
-
Integrated antenna
None
3CWE591
3Com 6/8dBi Dual-Band Omni
Antenna
Must be used with 3CWE586 and one of the
following: 3CWE580, 3CWE581 or 3CWE582.
