2
3Com AP3150 Managed Access Point Features
Feature
Description
1
Antenna
Connectors
Two RSMA type antenna connectors allow you to connect antennas
that operate in 2.4 GHz and 5.0 GHz bands.
2
LEDs
The LEDs indicate power and activity. See “Checking the LED
Indicators” on page 9 for details.
3
Ethernet Port
The Ethernet port provides a 10/100BASE-TX Ethernet connection to a
3Com Wireless LAN switch. The connection can be direct to a 3Com
switch or indirect through an intermediate Layer 2 or Layer 3 network.
Use a standard Category 5 cable with straight-through signaling and
standard RJ-45 connectors to connect the access point to the switch
on the network.
4
Serial Port
The serial port is not supported.
5
Reset Button
To restore factory settings, press the reset button during power-up by
inserting a pointed object into the reset hole on the back of the access
point and holding for at least 20 seconds. XREF.
6
Kensington lock connector
7
Detachable rear-panel cover
8
Mounting Bracket
The mounting bracket comes attached to the access point and allows
the unit to be mounted on a wall or ceiling.
2
6
4
3
1
5
7
8
1
