![3Com 3CRWER300-73 User Manual Download Page 116](http://html1.mh-extra.com/html/3com/3crwer300-73/3crwer300-73_user-manual_441865116.webp)
114
C
HAPTER
5: C
ONFIGURING
THE
R
OUTER
Figure 95
Add new PPTP VPN Tunnel Screen
1
Set the
Tunnel Type
to
PPTP.
2
Enter a descriptive name for the tunnel in the
Tunnel Name
field.
3
Enter the
User name
and
Password
.
4
Enter the
Idle Timeout
value.
5
Set the PPTP Type Setting to
PPTP Server
, or
PPTP Client
.
■
if you set the type as
PPTP Client
, then set the
Local Type Setting
to
Network or Host, then enter the
Remote Server
IP. Check the Auto
reconnect box, if you want to auto-reconnect after disconnection.
■
if the PPTP Type Setting is set to
PPTP Server
, go to step 6.
6
Check the box to enable the
Remote Network Setting
, and then enter the
Remote Network Address
, and
Remote Subnet Mask
information.
7
When the PPTP Type Setting is set to
PPTP Client
, you would then need to
enter the
Pre-shared Key
information.
8
Click
Apply
.
Summary of Contents for 3CRWER300-73
