15
C
ONNECTING
THE
B
RIDGE
TO
THE
LAN
You can connect to the LAN either through the 3Com power supply or through
IEEE 802.3af power-over-Ethernet compliant equipment.
U
SING
THE
P
OWER
S
UPPLY
The power supply can be located indoors at any point between the bridge and
the LAN access port where an accessible power outlet exists.
Connect the cable coming from the bridge to the port labeled
To Access Point
on
the power supply.
Connect another Ethernet cable from the port labeled
To Hub/Switch
on the
power supply to an Ethernet LAN port, as shown.
U
SING
A
P
OWER
-O
VER
-E
THERNET
LAN P
ORT
If your LAN equipment complies with the IEEE 802.3af power-over-Ethernet
standard, you can connect the bridge directly to a LAN port. For example, the
CAUTION:
To avoid damaging network equipment, make sure that the cables
are connected from bridge to power supply to LAN as shown and
described above.
Summary of Contents for 3CRWEASY96A
Page 5: ...Regulatory Compliance Information Index ...
Page 6: ......
