3Com 3CR17660-91, Configuration Manual

Page: 143 / 422

Root Bridge Configuration 129
Configuration procedure (in system view)
Configuration procedure (in Ethernet port view)
Among aggregated ports, you can only configure the links of master ports as
point-to-point links.
If an autonegotiating port operates in full duplex mode after negotiation, you can
configure the link of the port as a point-to-point link.
After you configure the link of a port as a point-to-point link, the configuration
applies to all spanning tree instances. If the actual physical link of a port is not a
point-to-point link and you forcibly configure the link as a point-to-point link,
temporary loops may be incurred.
Configuration example
1 Configure the link connected to GigabitEthernet1/0/1 port as a point-to-point link.
■
Configure in system view.
<S4200G> system-view
Table 98 Specify whether or not the links connected to the specified ports are point-to-point
links (in system view)
Operation Command Description
Enter system view system-view —
Specify whether or not
the links connected to
the specified ports are
point-to-point links stp interface interface-list
point-to-point
{
force-true | force-false |
auto }
Required
The auto keyword is adopted by default.
The force-true keyword specifies that the
links connected to the specified ports are
point-to-point links.
The force-false keyword specifies that the
links connected to the specified ports are
not point-to-point links.
The auto keyword specifies to
automatically determine whether or not
the links connected to the specified ports
are point-to-point links.
Table 99 Specify whether or not the link connected to a specific port is a point-to-point link
(in Ethernet port view)
Operation Command Description
Enter system view system-view —
Enter Ethernet port
view interface interface-type
interface-number
—
Specify whether or not
the link connected to
the port is a
point-to-point link stp point-to-point
{
force-true |
force-false | auto }
Required
The auto keyword is adopted by
default.
The force-true keyword specifies
that the link connected to the port
is a point-to-point link.
The force-false keyword specifies
that the link connected to the port
is not a point-to-point link.
The auto keyword specifies to
automatically determine whether or
not the link connected to the port is
a point-to-point link.