3Com 3CR17500-91, Getting Started Manual

Page: 38 / 70

38 C
HAPTER
3: S
ETTING
U
P FOR
M
ANAGEMENT
Viewing IP Information via the Console Port
You are now ready to view the automatically allocated IP information
using the command line interface.
1 Connect your Switch to the network using an Ethernet cable. As soon as
a network connection is made the Switch begins the automatic IP
configuration process.
The automatic IP configuration process usually completes within one
minute.
2 The command line interface login sequence begins as soon as the Switch
detects a connection to its console port.
If the login prompt does not begin immediately, press Return a few times
until it starts.
3 At the login and password prompts, enter
admin
as your user name and
enter your password at the password prompt (or just press Return if you
have not yet set a password). If you have logged on correctly, the
top-level menu of the command line interface is displayed as shown in
the example in Figure 11.
Figure 11 Example top-level command line interface menu
4 At the Select menu option prompt enter the
protocol ip
interface summary
command. A summary of the automatically
allocated IP information is displayed. Make a note of the Network IP
Address.
The initial set up of your Switch is now complete and the Switch is ready
for you to set up your chosen management method. See “Methods of
Managing a Switch” on page 39.
Menu options: -----------3Com SuperStack 3 Switch 3226-----------------------
bridge - Administer bridge-wide parameters
feature - Administer system features
gettingStarted - Basic device configuration
logout - Logout of the Command Line Interface
physicalInterface - Administer physical interfaces
protocol - Administer protocols
security - Administer security
system - Administer system-level functions
trafficManagement - Administer traffic management
Type ? for help.
------------------------------------- (1)------------------------------------
Select menu option:
DUA1750-0AAA01.book Page 38 Friday, December 5, 2003 10:24 AM