18
C
HAPTER
1: I
NTRODUCING
THE
O
FFICE
C
ONNECT
M
ANAGED
S
WITCH
9
AND
S
WITCH
9 FX
When an SFP module is inserted it has priority over the 100BASE-FX port.
The corresponding 100BASE-FX port is disabled when an SFP module is
present.
100BASE-FX Port
The Switch 9 FX has one 100BASE-FX LC port. This is a 100 Mbps
fiber-optic port that can use standard multi-mode fiber-optic cable of up
to 2 kilometers (1.2 miles). It uses the standard duplex LC connector that
allows both the transmit and the receive fibers to be connected in the
same space as an RJ-45 port.
When an SFP module is inserted it has priority over the 100BASE-FX port.
The corresponding 100BASE-FX port is disabled when an SFP module is
present.
Console Port
The console port allows you to connect a terminal and perform local
out-of-band management. The console port uses an RJ-45 to DB-9 null
modem cable (supplied with the Switch) and is set to 19200 baud, 8 data
bits, no parity and 1 stop bit.
The default configuration automatically detects any of the following baud
rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
However, you must set the baud rate on your management device to
19200 baud if you want to view all the system initialization messages.
Power Socket
The power adapter supplied with the Switch automatically adjusts its
power setting to any supply voltage in the range 100-240 VAC. Only use
the adapter provided with the Switch.
