manualshive.com logo in svg

3Com 3CR13500, Hardware And Software Users Manual

Share
Download
3Com 3CR13500 Hardware And Software Users Manual Download Page 22

3-4

3COM Security Switch 6200 Hardware and Software Users Guide

Interface Connections and First Time Start-Up

2.

Attach the male end of the power cable into an AC power source. The 
system is powered up when power is applied to the power supplies.

NOTE: If the system is powered up with one power supply or if one of the 
power supplies experiences a loss of power, an audible alarm sounds. To 
silence this sound, press the red button located on the left side of the primary 
power supply.

Startup and 
Normal 
Operation 
LED Displays

During power up and normal operation, you can observe start-up activity 
by checking LED activity on the system front panel.

Table 3-1 describes the various front panel LEDs and their function.

Table 3-1  Front Panel LED Descriptions

1.

The PWR LED sleep indication is maintained on standby by the system. If the 
system is powered down without going through BIOS, the LED state in effect at 
the time of power off, is restored when the system is powered on until cleared by 
the BIOS. If the system is not powered down normally, the PWR LED may 
blink even though the SYS LED may be off due to a failure or configuration 
change that prevents the BIOS from running.

2.

The Amber status takes precedence over the Green status. When the Amber 
LED is on or flashing, the Green LED is off.

3.

This LED is also off when the system is powered off or in a sleep state.

LED

Color/Label

State

Description

10/100 Fast Ethernet  Green

On

Ethernet connectivity present.

Yellow

Flashing

Traffic is present.

10/100/100 Fast 
Ethernet/Gigabit 
Ethernet 

Fiber/Green

On

Fiber connectivity present.

Activity/Green Flashing

Traffic is present.

Link/Green

On

Ethernet connectivity present.

Power/Sleep(PWR)

Green

On 

Power on.

Flashing 

1

In sleep state.

Off

Off

Power is off.

MGMT1/MGMT2

Green

Random Flash

NIC activity present.

System Status (SYS) Green

On

Running with normal operation.

Flashing 

2

Degraded.

Amber

On

Critical or non-recoverable condition. 

Flashing 

2

Non-critical condition.

Off

Off

Post/system stop.

Disk Activity (HDD)

Green

Random Flash

Disk activity present.

Off

Off 

3

No hard disk activity detected.

Summary of Contents for 3CR13500















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands