3Com 3CNJ205 User Manual Download Page 14

Page: 14 / 92

Installing the IntelliJack

Connecting Devices to the IntelliJack

Once the power source and the data source have been verified in
good working order and the IntelliJack has been installed and

mounted, connect your networking devices (such as computers,
printers, IP phones, cameras, etc.) to the IntelliJack.

The IntelliJack has two ways to connect devices:

1 RJ-45 Personal Area Network (PAN) Ports — any of the four

switched ports on the bottom of the IntelliJack. All ports feature
10/100 Mbps auto-negotiation, which configures the NJ

IntelliJack for 10 Mbps or 100 Mbps connections automatically.

2 Pass-through port—a single pass-through port is provided

that allows an additional device to be connected to a
separate network segment through the same IntelliJack. The
data or voice traffic that travels through the pass-through
port, passes through the IntelliJack without being switched.

Summary of Contents for 3CNJ205





























































































Search results

Summary of Contents for 3CNJ205

Reviews:

Related manuals for 3CNJ205

Brands by name

Popular brands

3Com 3CNJ205, User Manual

Search results

Summary of Contents for 3CNJ205

Reviews:

Related manuals for 3CNJ205

Brands by name

Popular brands