29
If you encounter problems with the NJ105 IntelliJack:
■
Verify the IntelliJack is receiving power by viewing the
Power LED (it should be on). If the Power LED is not on,
make sure that:
■
(If using Power Over Ethernet) the other end of the
network cable is plugged into a switch on the network
that has Power Over Ethernet integrated into it, or one
that feeds into an external midspan power supply that
supports Power Over Ethernet.
■
(If using a local power supply) the power supply is
plugged into the IntelliJack and into a working electrical
outlet.
■
Verify the IntelliJack is connected to the network properly
by viewing the Link LED (it should be on). If the Link LED is
not on, make sure the network cable:
■
Is terminated properly. Refer to the connector
manufacturer’s instructions for terminating the cable. Be
sure to test the connector and verify it is working.
■
Has a valid connection to the network.
■
Adheres to proper length and cabling specifications for
your network.
E
Troubleshooting
Summary of Contents for 3CNJ105
Page 10: ...About the NJ105 IntelliJack 6 ...
Page 16: ...Installing the IntelliJack 12 ...
Page 20: ...Specifications 16 ...
Page 30: ...Power Options 26 ...
