manualshive.com logo in svg

3Com 3CNJ105, User Manual

Share
Download
3Com 3CNJ105 User Manual Download Page 11

7

Installing the NJ105 consists of the following steps:

1

Set up the power supply.

2

Mount the NJ105 to the wall outlet box.

3

Connect devices to the NJ105.

4

Check the NJ105 LEDs.

Setting up the Power Supply

Power to the IntelliJack is provided through one of the following 
methods:

■

Over the network via an integrated switch that supports 
Power Over Ethernet.

■

Over the network via an Ethernet multi-port endspan power 
supply.

■

Over the network via a single-port Ethernet power supply.

■

Locally via a 3Com local power supply.

NOTE: 

Power Over Ethernet, also known as in-line 

power, is a method to provide power to equipment over 
an Ethernet cable, allowing a device to receive both data 
and power from the same network cable. The NJ105 is 
ideally powered by a switch that is IEEE 802.3af-
compliant. The NJ105 can also be powered by some 
switches that are not 802.3af-compliant. Consult the 
3Com web site for more information.

2

Installing the IntelliJack

Summary of Contents for 3CNJ105













































Reviews:

No comments

Brands by name

Popular brands

Load more brands