3Com 3CDSG8-US - OfficeConnect Managed Gigabit Switch User Manual Download | Manualshive

Page: 32 / 94

background image

32

System

•

APPLY

- Updates the switch configuration. No changes are made to the configuration

until this button is pressed.

•

CANCEL

- All changes made to the page are discarded and the switch configuration

remains unchanged.

4.4

Tools

On the Tools page, you can restore the switch to default settings, upgrade the firmware of the
switch, or restart the switch.

Restore to Factory Defaults

Forces the switch to restore the original factory settings. To reset the switch, select “Reset to
Factory Defaults” from the drop-down list and click APPLY.

Upgrade Firmware

Upgrades the switch system firmware using a file provided by 3com. Select “Upgrade
Firmware” from the Tools drop-down list then click on the “Browse” button to select the
firmware file. Click the APPLY button to upgrade the selected switch firmware file. You can
download firmware files for your switch from the Support
section of the 3com web site at www.3com.com.

Upload/Download Configuration

«
...
30
31
32
33
34
...
»

Summary of Contents for 3CDSG8-US - OfficeConnect Managed Gigabit Switch































































































Reviews:

No comments

Related manuals for 3CDSG8-US - OfficeConnect Managed Gigabit Switch

Brand: D-Link Pages: 14

Brand: eao Pages: 2

Brand: eao Pages: 2

Brand: IBM Pages: 156

Brand: Xantech Pages: 20

Brand: AVLT-Power Pages: 12

Brand: NTI Pages: 15

Brand: Gomax Pages: 24

Brand: H3C Pages: 27

Brand: Lancom Pages: 21

Brand: Racal Instruments Pages: 53

Brand: Black Box Pages: 50

SECURVIEW SV-7020

Brand: CrimeStopper Pages: 1

Area box distribution switch

Brand: LEGRAND Pages: 87

Brand: Alloy Pages: 13

Brand: Shinybow USA Pages: 32

Brand: Intelix Pages: 40

Brand: Maretron Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands