103
■
10
— Indicates the port is currently operating at 10 Mbps.
■
100
— Indicates the port is currently operating at 100 Mbps.
■
1000
— Indicates the port is currently operating at 1000 Mbps.
■
Auto
— Use to automatically configure the port.
■
No Change
— Retains the current port speed.
■
Duplex
— Specifies the port duplex mode. This field is configurable
only when auto negotiation is disabled, and the port speed is set to
10M or 100M. The possible field values are:
■
Auto
— Use to automatically configure the port.
■
Full
— The interface supports transmission between the device and
its link partner in both directions simultaneously.
■
Half
— The interface supports transmission between the device
and the client in only one direction at a time.
■
No Change
— Retains the current port duplex mode.
■
Flow Control
— Specifies the flow control status on the port.
Operates when the port is in full duplex mode. The possible field
values are:
■
Enable
— Enables flow control on the port.
■
Disable
— Disables flow control on the port.
■
No Change
— Retains the current flow control status on port.
■
Reactivate
— Reactivates a port if the port has been shutdown
through a device security option
.
The possible field values are:
■
Reactivate
— Reactivates a port.
■
No Change
— Retains the current port status.
■
Select Ports
— Selects the ports to be configured.
2
Define the fields.
3
Click
. The ports are configured, and the device is updated.
