English
– 11 –
Windows 95 OSR 2
1
Make sure that the CardBus PC Card is inserted and connected to the
network, as described earlier.
2
Turn the notebook on.
The New Hardware Found window appears briefly.
The Update Device Driver wizard window appears and states that it has
detected the PCI Ethernet Controller.
3
Insert the
LAN Installation Disk
and click
Next
to begin driver
installation.
The following message appears:
“Windows found the following updated driver for this device:
FE575C-3Com 10/100 LAN CardBus Fast Ethernet”
If you are prompted for the
LAN Installation Disk
make sure that a: is the
designated path.
If Windows 95 prompts for the Windows CD, insert the Windows 95 CD
into your CD-ROM drive. This is usually drive D. If your CD-ROM drive is
drive D, the path in the dialog box should be d:\win95.
If the Windows 95 files are installed on your notebook, the Windows 95
files may be located in the folder c:\windows\options\cabs.
4
Click
Finish
to accept the driver.
If during installation the 3Com driver cannot be found, enter a:\ to point
Windows to the driver.
The PC Card network driver installation is complete.
5
Remove the
LAN Installation Disk
and restart the notebook.
Windows NT Version 4.0
This section describes how to install the network driver when your notebook
is running Windows NT 4.0 and Windows NT networking is installed. If
Windows NT networking is not installed, see “Installing for Windows NT”
in the User Guide.
1
Make sure the CardBus PC Card is inserted and connected to the
network, as described earlier.
2
Turn the notebook on.
3
Using the Control Panel, double-click
Network
.
If the “Windows NT networking is not installed” prompt appears, see
“Installing for Windows NT” in the User Guide.
4
Select the Adapters tab and click
Add.
The Select Network Adapter screen appears.
5
Click
Have Disk.
6
In the Insert Disk dialog box, type: a:
7
Insert the
LAN Installation Disk
into the floppy drive and click
OK.
Summary of Contents for 3CCFE575CT
Page 39: ......
