5-2
C
HAPTER
5: C
HANGING
C
ONFIGURATION
S
ETTINGS
Changing Power Management with Windows 95
To enable or disable power management with Windows 95,
follow these steps:
1 Click the Control Panel icon.
2 Click Systems.
3 Click Device Manager.
4 Highlight the 3Com EtherLink III LAN PC Card.
5 Click Properties.
6 Click on Enable or Disable power management.
7 Close the windows.
The power management status is changed.
Changing Configurations Settings with DOS
You cannot change configuration settings if Card Services
is installed. To change the configuration settings using the
DOS program, follow these steps:
1 Make sure the PC Card is installed and connected to
the network, as described in Chapter 2.
2 Boot the PC under DOS.
If your computer is running an operating system other than
DOS, exit to the DOS prompt. For instructions, see the
operating system documentation.
3 Insert the EtherDisk diskette in the A drive and type
the following command at the DOS prompt:
a:\install [Enter]
The main menu appears.
4 Select Configuration and Diagnostic program and
press [Enter].
5 On the next menu, select Configure Adapter and
press [Enter].
You can select Show Configuration Information to display
configuration information.
