3-12
C
HAPTER
3: I
NSTALLING
THE
N
ETWORK
D
RIVER
11 Click OK.
12 In the Network Adapters dialog box, click Close.
13 In the Network Setup dialog box, click OK.
14 If prompted, supply the information you gathered
before you began the installation. After you enter
the information, click OK.
A message appears, prompting you to restart your PC.
15 Click Continue instead.
16 If you are not using Card Services and you have a
memory manager (all PCs running Windows have a
memory manager), you must exclude the CIS memory
address range for the PC Card and other Card Services
devices.
For more information, see Appendix A.
The driver installation is complete.
AutoLink for Windows 3.x, Windows for Workgroups,
and DOS
If only one PC Card has been installed, you can use 3Com’s
AutoLink
™
software program to automatically install the
NetWare ODI client software (including the driver), and to
modify the CONFIG.SYS and AUTOEXEC.BAT files.
To use the AutoLink program, the PC must meet these
requirements:
■
Use Novell NetWare 3.12, 4.10, or 4.11 network
operating system
■
Have
only one
3C589D PC Card installed
■
Be intended for use as a NetWare DOS ODI client
To use the AutoLink program, follow these steps:
1 Make sure the 3C589D PC Card is installed and
connected to the network, as described in Chapter 2.
2 Boot the PC under DOS.
3 Insert the EtherDisk diskette into drive A, type the
following at the DOS prompt:
a:install [Enter]
