2-6
C
HAPTER
2: C
ONFIGURING
THE
RAS 1500 S
OFTWARE
The default for the above question is yes. 3Com recommends that you
enter y here to configure only initial settings using this CLI Quick Setup.
The section that follows, “Using the Web Configuration Interface from PC
and UNIX-based Platforms,” will describe procedures for using the Web
Configuration Interface to continue your configuration of the RAS 1500.
Please answer the following questions with "yes" or "no" to
indicate which portions of the system you want to configure.
When Quick Setup displays a question it will display a
default
answer in square brackets, like "[yes]". If you
simply press enter, this is the answer that will be
used for you.
Network management [yes]?
IP [yes]?
IPX [no]? Y
AppleTalk [no]?
Quick Setup Identification information
--------------------------------------
>>> Enter the name of your system []:
system name
>>> Who is the system contact person []?
Your Name
>>> Where is this system located []?
Your Building Location
Quick Setup Management information
----------------------------------
You can set up your system to require a user to log in via the
console or leave it so that the console is always in command
line mode.
>>> Do you want a log in required at the console [no]?
>>> Do you want to be able to manage the system via SNMP
[yes]? An SNMP community names a group of systems that can
manage your system via SNMP. It is a rudimentary form of
security.
>>> What SNMP community will manage this system [public]?
Along with a community name, you need to give the IP address
of the system using that community. "0.0.0.0" means any
system.
>>> What is the address of the station for this community
[0.0.0.0]?
