3Com 3C16476A - Baseline Switch 2250, User Manual

Page: 46 / 79

46 C
HAPTER
4: C
ONFIGURING THE
S
WITCH
Guidelines for Creating Trunks
■
Any port on the Switch can be used for creating a
trunk.
■
This switch supports a maximum of four trunks.
■
Each trunk may contain up to four members.
■
A port may only be a member of one trunk at any
one time.
■
All ports in a trunk must be configured in an
identical manner, including communication mode
(that is, speed, duplex mode and flow control).
Four tabs are available on the Port Link Aggregation
page:
■
Summary
■
Create
■
Modify
■
Remove
Summary
Use the Summary tab to display Group ID, Port
members, and Link Type for a list of link aggregate
groups.
Figure 41 Link Aggregation Summary Screen
Create
Use the Create tab to add ports to a group
membership.
Figure 42 Link Aggregation Create Screen
To create a new link aggregation group:
1
Enter a link aggregation group ID in the box field.
2
Select the ports to add to the goup.
3
Click Apply .