3Com 3C16371 - LinkBuilder FMS - Hub, User Manual

Page: 65 / 132

Repeater Management 3 - 37
DUA1663-0BAA0 3
The screen shows the following fields:
Unit ID (Read-only) This field shows the unit to which the port belongs.
Port ID (Read-only) This field shows the identifier of the port you
selected to set up.
Media Type (Read-only) This field indicates the media type of the
port. Use Table 3-4 to determine the media type.
† These media types may be prefaced by “Modluar” to indicate a tranceiver module is fitted.
Port State (Choice Field) Enabled / Disabled
The default state of a port is enabled. If you do not wish to use a port,
set it to Disabled to prevent unauthorized access to the network.
Y ou cannot enable or disable a port that is the main or standby port of
a resilient link pair.
Security ( Choice Field) Enabled/ Disabled
A ll SuperSatck II Hub 10 units, all LinkBuilder FMS II 3C16665 and 3C16672
modules, and other LinkBuilder FMS II Modules with serial number prefixes
of 0200 or greater, offer the more sophisticated security function detailed
Table 3-4 Media Types
Media Type Description
AUI Standard AUI (female) connection with no internal
transceiver.
Modular Male AUI Male AUI connection with internal transceiver.
Modular Female AUI Female AUI connection with no internal
transceiver.
Thin Coax (10Base2) † Standard BNC Thin Ethernet connection.
Twisted Pair (10BASE-T) † Twisted Pair RJ45 connection.
Fiber (10BaseFL) † Fiber ST connection (10BaseFL / FOIRL).
Bridge † Standard AUI (female) connection.
Not Fitted No transceiver is installed.