5
S
TANDARD
F
EATURES
This chapter describes standard features of the NBX Business and Basic
Telephones. It covers these topics:
■
Answering a Call
■
Using the NBX Telephone Display Panel
■
More Ways to Dial a Call
■
Setting Your Call Coverage Point
■
Putting a Call on Hold
■
Transferring a Call
■
Establishing a Conference Call
■
Setting the Volume
Unless otherwise noted, the features described in this chapter are
available on the SuperStack 3 NBX, NBX 100, and NBX 25 systems.
For help on accessing NBX features from an analog telephone, see the
NBX Feature Codes Guide
in the NBX NetSet utility. For how to set up
your NBX NetSet password the first time, see
Chapter 1
.
If your system uses a messaging application other than NBX Messaging,
such as 3Com NBX Unified Communications or a third-party messaging
application, use the documentation for your messaging application
instead of the instructions in this chapter.
CAUTION:
The NBX telephone system operates over the LAN, not
through a traditional telephone connection. Your telephone is connected
to the NBX system through an RJ45 Ethernet connector instead of a
typical RJ11 telephone connection. Your telephone will not work unless it
is connected properly. Ask your administrator if you have questions about
your telephone connection.
Summary of Contents for 1102B - NBX Business Phone VoIP
Page 10: ...10 ABOUT THIS GUIDE...
Page 78: ...78 CHAPTER 7 GETTING MORE FROM YOUR TELEPHONE SYSTEM...
Page 96: ...96 INDEX...