3-2
C
HAPTER
3: L
OADING
THE
N
ETWORK
D
RIVERS
Using the
EtherDisk
Diskette
The
EtherDisk
diskette contains the latest versions of the
network drivers available when 3Com shipped the adapter.
It also contains other important information concerning
Fast EtherLink and EtherLink III adapters and their
configuration.
To obtain network operating system drivers not included on
the
EtherDisk
diskette, contact the manufacturer of that
network operating system or application. To obtain a list of
supported drivers along with software driver updates and
patches for the drivers on the
EtherDisk
diskette, use one of
the bulletin board services listed in Appendix D. For example,
Document 9071 in 3Com’s automated fax service contains a
list of all available drivers and drivers still being developed.
Refer to your network operating system manuals for specific
instructions for using the driver with your network operating
system.
The drivers on the 3C59X
EtherDisk
diskette are compatible
with the following bus master adapters:
■
Fast EtherLink PCI 10/100BASE-T (3C595)
■
EtherLink III PCI 10 Mbps (3C590)
■
Fast EtherLink EISA 10/100 (3C597)
■
EtherLink III EISA 10 Mbps (3C592)
The 3C59X drivers are not backward-compatible with the
3C5X9 family of EtherLink III adapters (ISA, EISA, or MCA).
Accessing DOS
The 3Com program for loading drivers is a DOS-based program
that loads network drivers, modifies some adapter parameters,
and runs diagnostic tests on the adapter. If you are using an
operating interface other than DOS, such as OS/2
â
or
Windows 3.x, and you want to use the
EtherDisk
diskette to
load the drivers, you must exit from that interface before
